Rochem Electro Solvents
Price And Quantity
- 100.00 - 1000.00 INR
- 1, 5 and 30 L
- For Parts Cleaning Purpose
- lectro Solvents
- Drum and Bucket
DESCRIPTION ROCHEM ELECTROSOLVENTS are cold degreasing safety solvents which are totally free from carbon tetra chloride (CTC). They combine the best cleaning qualities of the inflammable solvents and CTC, but eliminate the explosive and toxic dangers of these products. They are designed for degreasing and cleaning electrical equipments such as motors and generators, circuit breakers, distribution panels, machinery, instruments, etc. Additionally, these cleaners are very effective for removing dust particulates and oils where water washing is cumbersome, messy, troublesome or rust promoting.
USAGE ROCHEM ELECTROSOLVENTS, whilst having in common a high cleaning capacity, differ from each other in a number of special characteristics. In this way they give a broad range of applications and make it possible to tackle various problems with the best possible results.
â€¢ Electrosol Plus Dries slowly giving sufficient time for the solvent to be used economically over a wide area. Evaporates completely leaving no oily residue. â€¢ Electrosol Quick Dry This most effective product can be used confidently in areas where inflammable products are prohibited. Very high solvency power combined with fast drying, thus allowing rapid cleaning of electrical equipment, which has to be cleaned in a short space of time. â€¢ Anti-Moist A protective cleaner that removes dirt and grease, displaces water, and leaves behind a non-greasy protective film, which lubricates and protects against corrosion.
APPLICATION All Rochem Electrosolvents are easily applied by pressure jet, spray, brush, immersion or swab methods. As discussed above. Electrosol Quick Dry is virtually harmless to any type of insulating materials including plastics. Rochem Electrosolvents do not affect polyvinylchloride, nylon, ptfe, nitrocellulose and bakelite. Neoprene, rubber and buna rubber swell after prolonged contact, Polystyrene dissolves. Insulating materials are normally not harmed.
PRODUCTS FLASHPOINT DIELECTRIC FACTOR Electrosol Plus 62°C 30,000 V/cm Electrosol Quick Dry None 28,000 V/cm Anti-moist 66°C 38,000 V/cm All Rochem Electrosolvents are : NON TOXIC NON CORROSIVE NON EXPLOSIVE NON CONDUCTIVE Rochem Electrosol Quick Dry is absolutely NON INFLAMMABLE
HANDLING PRECAUTIONS Although the rate of toxicity of Rochem Electrosolvents is very low, careful attention should be given to adequate ventilation such as with the use of any solvent or paint. In case of contact with skin or eyes flush with plenty of water.
- Cash in Advance (CID), Cash Advance (CA)
- 1000 Per Day
- 5 Days
- All India
SB23, Highland Corporate Centre, Old Agra Road, Kapurbawdi Junction, Thane(W), Thane, Maharashtra, 400607, India